1/2 HP Electronic Variable Speed Drive Motor & Control System 1480-5400 RPM New

Description

This is a
1/2 HP Permanent Magnet DC Motor with Solid State Electronic Variable Speed Control
.
Please read the specs completely and carefully to be certain this will work for you:
1/2 HP Permanent magnet DC motor
1480 to 5400 RPM no-load speed range
(as measured with a digital tachometer with control powered at 122 volts)
Clockwise rotation
(facing end of motor shaft)(rotation can be reversed by switching the power leads inside control)
TEFC (totally enclosed fan cooled)
2 Mounting options on motor face as follows:
(4) Screws on the motor face in a 2-5/32" (55mm) circle 90 degrees apart
(2) Openings on motor mounting bracket approximately 3-3/4" (95mm) apart to accept up to 5/16" (8mm) diameter bolts
5/16" (8mm) Diameter x 1-3/4" (45mm) long output shaft with flat for set screw
Motor body is 3-5/32" (80mm) diameter x 5-1/4" (154mm) long with mount bracket installed
DC Motor control (solid state)
Input power: 110 Volts / 3.2 amps / 1 Ph / 60 Hz
Controls motor speed from approximately
1480 no-load RPM
(slightly delayed soft start) to 5400 no-load RPM (when powered at 122 volts)
Control box measures 5-1/8" long x 3-1/8" wide x 2-3/8" deep
With safety switch, variable speed control knob, built-in resetable circuit breaker, and fuse (plus extra fuse)
Heavy duty 6 ft grounded cord
Screws included to mount control box and motor
Motor produces its best torque in the top half of its speed range
This is a complete motor / control package ready to be mounted to your lathe, drill, mill, or any other machine requiring a 1/2 HP variable speed drive. This system is brand new but will come in generic packaging.
Please study the pictures and email with any questions.  Thanks for stopping by.
PLEASE NOTE: We sell 2L pulleys and belts that fit this motor and help to reduce its speed.
Safety Note: It is the buyer's responsibility to determine if this high speed motor is suitable for your application, to mount it securely, and to operate it in a safe manner. Failure to do so may cause injury.
Shipping weight is 6-1/2 lbs.