ADVANCED MOTION CONTROLS DIGIFLEX DC212EE30A40NAC Digital Servo Drive Can Rev D

Description

ADVANCED MOTION CONTROLS DIGIFLEX DC212EE30A40NAC Digital Servo Drive Can Rev D.  DIGITAL SERVO DRIVES WITH CANopen INTERFACE Condition is New.
This Series digital PWM servo drives are designed to drive brushed and brushless servomotors. These fully digital drives can operate in torque, velocity, or position mode. Various feedback signals can be used to close the velocity and position loop. The command source can be generated internally or can be supplied externally. In addition to motor control, these drives feature dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices.
Series drives feature a single CAN interface which supports the CANopen protocol (DS301 and DSP402). This interface is used for drive configuration and setup as well as online operation in networked applications. Drive commissioning can be accomplished through DigiFlex® DriveWare, a fully graphical Windows© based application.
Torque, velocity, or position commands can be generated from an analog input, a preset index table, or the CAN interface. This Series also feature an interpolated position mode with cubic interpolation for smooth, coordinated, multi-axis position control via the CAN interface. A homing routine based on the home switch input and/or the encoder index pulse is also implemented.
All drive and motor parameters are stored in non-volatile memory.